TR | EN

Dr. Öğr. Üyesi İrem Şanal

Bahçeşehir Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi

İnşaat Mühendisliği Bölümü

MAKALELER

  1. Aryanfar, A., Şanal, I. & Marian, J. "Percolation-Based Image Processing for the Plastic Viscosity of Cementitious Mortar with Super Absorbent Polymer" Int J Concr Struct Mater, 15 (25) , 2021.
  2. Şanal, I., Yalcin, B., Yalcin, I.E., Arda, L. “Application of Poly(Vinyl Acetate) and Poly(1,4-Butylene Adipate) Hydrophobic Surface Coatings on Cementitious Mortar Specimens” Advances in Concrete Construction, An International Journal, Vol. 11, No. 4, p. 323-333, 2021.
  3. Aryanfar, A., Şanal, I., Marian, J. “Novel Percolation-based Measure for Fiber Efficacy in Fiber Reinforced Concrete (FRC) Beams” Structural Concrete, https://doi.org/10.1002/suco.201900362, 22 (1), p. 264-272, 2021.
  4. Şanal, I. “Effect of Shear Span-to-Depth Ratio on Mechanical Performance and Cracking Behavior of High Strength Steel Fiber-Reinforced Concrete Beams without Conventional Reinforcement” Mechanics of Advanced Materials and Structures, DOI:10.1080/15376494.2018.1527963, 27 (21), 2020.
  5. Şanal, I., Hosseini, A. “Determination of Mid-Span Deflection by means of Crack Opening in Steel Fiber-Reinforced Cementitious Composite (SFRCC) Beams” Mechanics of Advanced Materials and Structures, DOI:10.1080/15376494.2018.1444230, 26(19), pp. 1636-1643, 2019.
  6. Şanal, I. “Fresh State Performance Design of Green Concrete Mixes With Reduced Carbon Dioxide (CO2) Emissions”, Greenhouse Gases: Science and Technology, DOI: 10.1002/ghg.1826, 8 (6), 2019.
  7. Şanal, I. “Understanding Global Mechanical Response of Fiber Reinforced Cementitious Composite Beams from Local Fracture Process” Structural Control and Health Monitoring, Vol. 25(8), DOI: 10.1002/stc.2202, 2018.
  8. Şanal, I. “Performance of Macro-Synthetic and Steel-Fiber Reinforced Concretes with Emphasis on Mineral Admixture Addition” J.of Mat. in Civil Eng., Vol. 30(6), DOI: 10.1061/(ASCE)MT.1943-5533.0002292, 2018.
  9. Şanal, I. “Discussion on the Effectiveness of Cement Replacement for Carbon Dioxide (CO2) Emission Reduction in Concrete” Greenhouse Gases: Science and Technology, Vol. 8 (2), DOI: 10.1002/ghg.1748, 2018.
  10. Şanal, I. “Beton Basınç Dayanım Testlerinde Küçük Ebatlı Küp Beton Numunelerin Yaygın Kullanımı İçin Şekil-Boyut Etkisinin Detaylı İncelenmesi” DEÜ Mühendislik Fakültesi Fen ve Mühendislik, V. 20 (58), pp. 103-120, DOI: 10.21205/deufmd. 2018205809, 2018.
  11. Şanal, I. “Significance of Concrete Production in Terms of Carbondioxide Emissions: Social And Environmental Impacts”, V.21(1), Journal of Polytechnic, Gazi University, DOI: 10.2339/politeknik.389590, Vol. 21 (2), 2018.
  12. Şanal, I. “Error Estimations for Flow Characterization with Numerical and Analytical Solutions” International Journal of Measurement Technologies and Instrumentation Engineering (IJMTIE), 6 (2), pp.16-28, DOI: 10.4018/IJMTIE.2017070102, 2017.
  13. Şanal, I., Ozyurt Zihnioglu, N., Hosseini, A. “Characterization of Hardened State Behavior of Self Compacting Fiber-Reinforced Cementitious Composites (SC-FRCC's) with Different Beam Sizes and Fiber Types", Journal of Composites Part B: Engineering, Vol.105, pp.35-45, 2016.
  14. Şanal, I., Ozyurt Zihnioglu, N., Hosseini, A. “Particle image velocimetry (PIV) to evaluate fresh and hardened state properties of self compacting fiber-reinforced cementitious composites (SC-FRCCs)”, Construction and Building Materials, Vol. 78. pp. 450-463, 2015.
  15. Şanal, I., Ozyurt Zihnioglu, N., “To what extent does the fiber orientation affect mechanical performance?”, Construction and Building Materials, Vol. 44. pp. 671-681, 2013.
  16. Ferrara, L., Bamonte, P., Caverzan, A., Musa, A., Sanal, I., “A comprehensive methodology to test the performance of Steel Fibre Reinforced Self-Compacting Concrete (SFR-SCC)”, Construction and Building Materials, Vol. 37. pp. 406-424, 2012.
  17. Ferrara, L., Bamonte, P., Caverzan, A., Musa, A.M. and Sanal, I.: “An Experimental Methodology to Assess the Performance of Steel Fiber-Reinforced Self-Compacting Concrete (FR-SCC)”, Annual Review of Structural Concrete, V. 31, pp. 155-184, 2011.

KONFERANS BİLDİRİLERİ

  1. Aryanfar, A., Şanal, I. “Image Processing for Workability of Concrete with Super Absorbent Polymer”, The 4-th International Conference on Intelligent Decision Science, Aug 7-8, 2020, in Istanbul, Turkey
  2. Sanal, I. “Evaluation of Ultra High Strength Concrete (UHSC) Containing Micro-Silica with Emphasis on Water/Cement Ratio Reduction”, International Congress on Engineering and Technology Management, December 2018, Istanbul, Turkey.
  3. Sanal, I., Bektaş, Z. “Toplu Ulaşım Sistemleri ile İlgili Beklentilerin Araştırılması ve Analizi ”, TRANSIST 2018 International Istanbul Transport Congress, 4I: Innovation, Integration, Information, Intelligence , November 2018, Istanbul, Turkey.
  4. Sanal, I. “Performance Based Study on Co-Polymer Based Macro Synthetic Fiber Reinforced Concretes” 2nd International Fiber and Polymer Research Symposium, March 2018, Bursa, Turkey.
  5. Sanal, I. “Use of Construction Waste Materials as Fine Aggregates for Concrete Production” IREMCON 2018, International Environmental Conference, March 2018, Istanbul, Turkey.
  6. Tansu, A., Sanal, I., “ Kent İçi Ulaştırmada Yönetim Modelleri”, TRANSIST 2017 International Istanbul Transport Congress, 4I: Innovation, Integration, Information, Intelligence , November 2017, Istanbul, Turkey.
  7. Sanal, I., “Detection of Early Crack Initiation and Crack Patterns” 2nd International Workshop on Seismic Loss, Rehabilitation and Post-Earthquake Crisis Management of Critical Infrastructure, November 2017, Istanbul, Turkey.
  8. Sanal, I., Sarıalioglu, D., “Beton basınç dayanımında küçük ebatli küp beton numunelerin yaygın kullanımı için şekil-boyut etkisinin detaylı incelenmesi”, THBB Beton Kongresi, 2017.
  9. Sanal, I., Ozyurt Zihnioglu, N., Hosseini, A., “Monitoring Fresh State Behavior of Fiber Reinforced Cementitious Composites (FRCCs): A Non Destructive Non Intrusive And Full Field Image Based Technique” 12th International Conference on ACE, September 21-23, 2016, Istanbul, Turkey.
  10. Sanal, I., Hosseini, A.,Ozyurt Zihnioglu, N., “An Alternative to Conventional Measurement Techniques for Evaluating Crack Propagations And Crack Width Openings” 12th International Conference on ACE, September 21-23, 2016, Istanbul, Turkey.
  11. Sanal, I., Sarıalioğlu, D., Pılgır, V., Turgut, T., Akkaya, Y. “Identification and Evaluation of CO2 Emissions of Various Concretes Produced in Different Ready Mix Concrete Plants” 12th International Conference on ACE, September 21-23, 2016, Istanbul, Turkey.
  12. Sanal, I., Ozyurt Zihnioglu, N., Hosseini, A., “Particle Image Velocimetry As a Method to Evaluate Fresh and Hardened State Performances of HPFRC’s”, 3rd International RILEM Conference on Strain Hardening Cementitious Composites (SHCC3-Delft), 3-5 November 2014, Dordrecht, Netherlands.
  13. Özyurt Zihnioğlu, N., Sanal, I., "Flexural performance of HPFRCs and the role of fiber orientation", R.N. Raikar Memorial International Conference and Dr. Suru Shah Symposium on Advances in Science & Technology of Concrete, December 20-21, 2013, Technical papers, Vol. II, p. 164-171., Mumbai, India.
  14. Ferrara, L., Bamonte, P., Caverzan, A., Musa, A.M. and Sanal, I.: “Testıng The Performance of Steel Fıbre Reınforced Self-Compactıng Concrete”, 8th RILEM International Symposium on Fiber Reinforced Concrete: challenges and opportunities, BEFIB 2012.
  15. Sanal, I., Ozyurt, N., “Effects of Formwork Dimensions on the Mechanical Performance of Fiber-Reinforced Cement Based Materials”, 9th International Conference on ACE, September 27-30 2010, Trabon, Turkey.
  16. Ozyurt, N., Tregger, N., Ferrara, L., Sanal, I., Shah, Surendra, “Adapting fresh state properties of fiber-reinforced cementitious material for high performance thin-section elements”, Proceedings of the 3rd International Rilem Symposium, Rheology of cement suspensions such as fresh concrete, Eds. Wallevik, O.H., Kubens, S., Oesterheld, S., August 19-21, 2009, Reykjavik, Iceland.

KİTAPLAR

  1. Aryanfar, A., Sanal, I. “Image Processing for Workability of Concrete with Super Absorbent Polymer”, Progress in Intelligent Decision Science, Proceedings of the 4th International Online Conference on Intelligent Decision Science (IDS 2020), ISBN: 978-3-030-66501-2, Springer, 2021
  2. Sanal, I., Verma, D. “Natural Fibre Reinforced Polymer Composites: Feasibility Study For Sustainable Automotive Industries” Biomass, Biopolymer-Based Materials and Bioenergy: Construction, Biomedical and other Industrial Applications, ISBN: 9780081024263, Elsevier, 2019.
  3. Verma, D., Sanal, I., “Construction Materials Reinforced with Natural Products”, Handbook of Ecomaterials, doi:10.1007/978-3-319-48281-1_75-1, Springer, 2018.
  4. Sanal, I., “Coir Fiber-Reinforced Composites”, Green Approaches to Biocomposite Materials Science and Engineering, IGI Global, International Publisher of Progressive Information Science and Technology Research, Pennsylvania, USA, 2016.
  5. Sanal, I., “Bamboo Fiber-Reinforced Composites”, Green Approaches to Biocomposite Materials Science and Engineering, IGI Global, International Publisher of Progressive Information Science and Technology Research, Pennsylvania, USA, 2016.

Bizi Takip Edin

Copyright @BAU

Design & Development BAU Digital Media & Web